Elastic Extension Rods (For Wheel Hubs)

The flange alignment tool is suitable for the alignment or realignment of flange joints in routine maintenance of pipelines. The tool is attached to the flange joint where misalignment is at its greatest and then simply pushes and pulls the flange into correct alignment(Except FA9TESTD). The flange alignment tools rectify twist and rotational misalignment quickly,…

The CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.

The RR-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

RIVERLAKE TMHC 110E is a hydraulic puller kit, which combines a jaw puller and a strong back puller with up to 100 kN (11.2 ton US) pulling power. The versatile puller kit facilitates safe and easy dismounting in a variety of applications.

RIVERLAKE hydraulic nut splitters are a simple, fast, safe, and efficient tool to remove the bolt and nut. In the open-air high temperature or corrosive environment, the bolt is usually bitten by rust and damaged by smashing, It is very difficult to remove them In the past. With the help of our hydraulic bolt cutters,…

The JH series hydraulic bottle jacks are made of high-strength aluminum alloy materials, all jack comes with a chrome-plated piston, and features a longer lifespan, and lower maintenance cost.

RIVERLAKE square drive hydraulic torque wrenches are made of high-strength Aluminum-Titan alloy, strong and durable. Our high torque hydraulic wrenches come with a max torque range of 140882 Nm for your selection. Adopting a precision ratchet and power mechanical design, the wrench’s accuracy is as high as ±3%.

HCRL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding.

RIVERLAKE safety cage hydraulic pullers are more efficient than traditional pullers, as one person can do the job whereas traditional pullers often require two operators. The opening, closing, locking, and aligning of the jaws are all done automatically by simply turning the T-handle.

The PH-200T provides the ultimate hydraulic muscle. It has been deemed the preferred maintenance solution for the effective removal of stubborn gears, bearings, wheels, and other press-fit items from machines throughout diverse industries.

All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump

The RSM series is a spring return, compact flat cylinder designed for use in narrow spaces and areas with low overhead clearance. They can be used in maintenance, machinery leveling, construction, and mining applications. RSM-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance and bronze overlay piston bearing area…