EPA, Electric Hydraulic Bolt Tensioner Pump

The CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.

RIVERLAKE’s RLT Series represents the pinnacle of space-optimized hydraulic actuation technology. These single-acting telescopic cylinders deliver exceptional power density while maintaining an ultra-compact collapsed height, making them ideal for machinery positioning and tool fastening applications where installation envelope is critical.

The RAR-SERIES is a general-purpose double acting lightweight aluminum cylinder designed for use in production, Maintenance, and fabrication applications. All RAR cylinders are equipped with bolt-on removable hardened steel saddles and are available in various capacities from 20 tons to 150 with a stroke from 50 mm to 250mm.

HCRL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding.

One of the most common ways to dismount small to medium size bearings is to use a mechanical puller. The RIVERLAKE TMMP3 series is a three arm puller for small to medium sized bearings. It helps the user to safeguard against damage to the bearing or to the bearing seating during dismounting. The RIVERLAKE Standard…

Hydraulic coupler puller focuses on dismantling the hydraulic couplings. With the feature of saving time and strength, it is easy to operate, without injury to the equipment. Widely used in steel plant, metallurgy, electric power, cement plant, coal mine etc.

The RC-SERIES is a general-purpose spring return cylinder designed for use in production, Maintenance, and fabrication applications. All RC-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance. When combined with the bronze overlay on the piston bearing area and low friction surface treatment on the gland nut, this cylinder…

RACL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding. RACL-Series cylinders…

RIVERLAKE produces and sells various non-standard torque wrench reaction arms: extended reaction arms, sliding reaction arms (adjustable center distance), sliding extension rods (for wheel hubs), elastic extension rods (for wheel hubs), curved reaction arms, reaction arms (for rims), pentagonal reaction arms (for rims), and pentagonal reaction arms (for impellers).

The RC-SERIES is a general-purpose spring return cylinder designed for use in production, Maintenance, and fabrication applications. All RC-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance. When combined with the bronze overlay on the piston bearing area and low friction surface treatment on the gland nut, this cylinder…

The RACH series is a spring return hollow piston rod aluminum cylinder. The hollow piston allows for a rod or cable to be inserted through the entire body length. They can be used in tensioning, load testing, bush extracting, and maintenance applications. All RACH-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance…

High Tonnage single-acting load return hydraulic cylinder with lock nut. For demanding high-capacity lifting applications that require safe mechanical locking for extended periods