HA5TW, Pneumatic Torque Wrench Pumps

The RCH series is a spring return hollow piston rod cylinder. The hollow piston allows for a rod or cable to be inserted through the entire body length. They can be used in tensioning, load testing, bush extracting, and maintenance applications. All RCH-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance and…

RIVERLAKE integral hydraulic pullers come with a built-in hydraulic hand pump, with no need for an extra hand pump and hydraulic hoses set up. Our integral pullers’ capacity range from 10 tons to 50 tons and are portable tools for bearing removal applications

CULP-Series Low Profile Hydraulic Pancake Cylinders are ulta-flat, single-acting load return and include a stop ring to limit the maximum stroke. All models are finished with a baked enamel finish for enhanced durability and corrosion protection in harsh working environments.

HCRL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding.

Hydraulic puller sets include detachable hydraulic cylinders and a choice of pump options, along with a gauge assembly and hose for safe monitoring of applied pulling forces.

The CLRG-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

CLL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding. All CLL-Series…

RIVERLAKE’s EPHS vehicle-mounted hydraulic puller is hydraulically operated to achieve the vertical height adjustment of the puller, the extension of the jaws, and the pull-out of the workpiece. The puller is mainly composed of a jaw mechanism, a jaw extension mechanism, a main cylinder height adjustment mechanism, a roller cart, an electric hydraulic pump, and…

RIVERLAKE safety cage hydraulic pullers are more efficient than traditional pullers, as one person can do the job whereas traditional pullers often require two operators. The opening, closing, locking, and aligning of the jaws are all done automatically by simply turning the T-handle.

RIVERLAKE TMBS series strong back puller facilitates the dismounting of bearings in applications where the use of traditional jaw pullers is restricted due to lack of space or when the application requires a long reach. The puller is operated mechanically and is especially suitable for small shaft diameters. A special separator design is used that…

Our PH series hydraulic puller systems provide maximum pulling force in applications requiring high-force removal of large gears, pulleys, wheels, sleeves, and other press fit parts. 100 Ton pullers are available in 3-jaw, 2-jaw, or 2/3-jaw combination systems.