Sliding Extension Rods (For Wheel Hubs)

HCR Series Hydraulic Cylinders are double-acting which delivers a faster and more controlled return of the plunger compared to load/gravity return equivalents.riverlake High-Tonnage Cylinders are equipped with numerous special features to ensure the durability, safety, and performance needed for large-scale construction projects. Among these features are low-wear high-pressure seals, replaceable composite plunger support bearings, and…

CLL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding. All CLL-Series…

RIVERLAKE safety cage hydraulic pullers are more efficient than traditional pullers, as one person can do the job whereas traditional pullers often require two operators. The opening, closing, locking, and aligning of the jaws are all done automatically by simply turning the T-handle.

The JH series hydraulic bottle jacks are made of high-strength aluminum alloy materials, all jack comes with a chrome-plated piston, and features a longer lifespan, and lower maintenance cost.

The hollow piston allows for a rod or cable to be inserted through the entire body length, while the double-acting design improves the speed of operation when longer stroke cylinders are required. They can be used in tensioning, load testing, bush extracting, and maintenance applications. All cylinders in this range have base mounting holes.

All LGHMS-Series Master Puller Sets include an LGH-Series Puller, a Cross Puller, a Bearing Separator, a Bearing Cup Puller, a detachable Hollow Cylinder, a hose, a gauge and a pump

RIVERLAKE integral hydraulic pullers come with a built-in hydraulic hand pump, with no need for an extra hand pump and hydraulic hoses set up. Our integral pullers’ capacity range from 4 tons to 50 tons and are portable tools for bearing removal applications

High Tonnage single-acting load return hydraulic cylinder with lock nut. For demanding high-capacity lifting applications that require safe mechanical locking for extended periods

Engineered for precision in the ocean’s depths, the RIVERLAKE EAJ Series redefines subsea bolting with its revolutionary Split Nut technology and zero-spill safety. Designed for diver efficiency in low-visibility environments, it delivers uncompromised performance at 150MPa for critical underwater infrastructure.

The RIVERLAKE HCG series offers high-capacity single-acting cylinders featuring a load return plunger for simple operation with fewer components to maintain, enhanced by a nitrocarburized finish providing superior resistance to side-loading and cyclic wear, ensuring consistent 10% side-load resistance throughout the full stroke; safety is prioritized with a stop-ring preventing plunger blow-out, certified lifting eyes,…

The CLRG-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

The RCS series is a spring return, compact flat cylinder designed for use in narrow spaces and areas with low overhead clearance. They can be used in maintenance, machinery leveling, construction, and mining applications. RCS-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance and bronze overlay piston bearing area…