Description
Model: CLP-4002
Series: CLP
Product Lines: Industrial Tools
- Lock nut provides mechanical load holding for a safe work environment
- An integrated tilt saddle allows for up to 5 degrees of misalignment
- Extreme low height for use in confined areas
- 10% side-load resistance of maximum capacity
- Overflow port as stroke limiter to prevent plunger blow-out
- Single-acting, load-return
- Plunger wiper reduces contamination, extending cylinder life
- Baked enamel finish for increased corrosion resistance
- Hardened and chromed piston reduces wear and corrosion
- Hardened alloy steel guide ring eliminates over travel and provides support to reduce wear from off-center loads
- High strength composite bearing provides support for off-center loads without damaging the cylinder walls
- An Industrial U-cup style seal prevents costly leaks
Think Safety
Manufacturer’s rating of load and stroke are maximum safe limits. Good practice encourages using only 80% of these ratings!
Image Gallery
CE Certification
Specifications
| Maximum Operating Pressure (bar) | 700 |
| Capacity Class (tonnage) | 400 |
| Stroke (mm) | 45 |
| Collapsed Height A (mm) | 178 |
| Extended Height B (mm) | 223 |
| Return Type | Single-Acting, Load Return |
| Plunger Type | Solid |
| Material | CR40 |
| Cylinder Effective Area Advance (cm2) | 551.3 |
| Oil Capacity Advance (cm3) | 2481 |
| Sideload Resistance of Maximum Capacity (percentage) | 10% |
| Surface Treatment | Baked enamel finish |
| Coupler | 3/8NPT-18 |
| Weight (kg) | 134 |
Dimensions
| Collapsed Height/mm(A) | 178.00 |
| Extended Height/mm(B) | 223.00 |
| Outside Dia/mm(D) | 350 |
| Cylinder Bore Dia/mm(E) | 250 |
| Plunger Dia/mm(F) | TR265 X 6 |
| Base To Advance Port/mm(H) | 39 |
| Standard Saddle Dia/mm(J) | 250 |
| Saddle Protri. From Plgr./mm(K) | 11 |
| Saddle Max. Tilt Angle(R) | 4℃ |
| Lock Nut Height/mm(S) | 55 |
Series Comparison
| Model Number | Capacity/Ton | Stroke/mm | Cylinder Effective Area/cm2 | Oil Capacity/cm3 | Collapsed Height/mm(A) | Extended Height/mm(B) | Outside Dia/mm(D) | Cylinder Bore Dia/mm(E) | Plunger Dia/mm(F) | Base To Advance Port/mm(H) | Standard Saddle Dia/mm(J) | Saddle Protri. From Plgr./mm(K) | Saddle Max. Tilt Angle(R) | Lock Nut Height/mm(S) | Weight/Kg |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| CLP-602 | 60 | 50 | 86.6 | 433 | 125.00 | 175.00 | 140 | 96 | TR104 X4 | 19 | 96 | 6 | 5℃ | 28 | 14.5 |
| CLP-1002 | 100 | 50 | 143.1 | 715 | 137.00 | 187.00 | 175 | 126 | TR134.5 X 6 | 21 | 126 | 8 | 5℃ | 31 | 23.5 |
| CLP-1602 | 160 | 45 | 226.9 | 1021 | 148.00 | 193.00 | 220 | 159 | TR170 X 6 | 27 | 160 | 9 | 5℃ | 40 | 41.5 |
| CLP-2002 | 200 | 45 | 283.4 | 1275 | 155.00 | 200.00 | 245 | 180 | TR 190 X6 | 30 | 180 | 10 | 5℃ | 43 | 57 |
| CLP-2502 | 250 | 45 | 362.9 | 1633 | 159.00 | 204.00 | 275 | 200 | TR215 X 6 | 32 | 200 | 11 | 5℃ | 44 | 74 |
| CLP-4002 | 400 | 45 | 551.3 | 2481 | 178.00 | 223.00 | 350 | 250 | TR265 X 6 | 39 | 250 | 11 | 4℃ | 55 | 134 |
| CLP-5002 | 520 | 45 | 730.3 | 3286 | 192.00 | 237.00 | 400 | 290 | TR305 X 6 | 48 | 290 | 10 | 3℃ | 62 | 189 |
