Description
Model: CLL-1508
Series: CLL
Product Lines: Industrial Tools
- Lock nut provides mechanical load holding for a safe work environment
- 10% side-load resistance of maximum capacity
- Overflow port as stroke limiter to prevent plunger blow-out
- Single-acting, load-return
- Plunger wiper reduces contamination, extending cylinder life
- Baked enamel finish for increased corrosion resistance
- Hardened and chromed piston reduces wear and corrosion
- Hardened alloy steel guide ring eliminates over travel and provides support to reduce wear from off-center loads
- High strength composite bearing provides support for off-center loads without damaging the cylinder walls
- An Industrial U-cup style seal prevents costly leaks
Think Safety
Manufacturer’s rating of load and stroke are maximum safe limits. Good practice encourages using only 80% of these ratings!
Specifications
Maximum Operating Pressure (bar) | 700 |
Capacity Class (tonnage) | 150 |
Stroke (mm) | 200 |
Collapsed Height A (mm) | 359 |
Extended Height B (mm) | 559 |
Return Type | Single-Acting, Load Return |
Plunger Type | Solid |
Material | CR40 |
Cylinder Effective Area Advance (cm2) | 201 |
Oil Capacity Advance (cm3) | 4020 |
Sideload Resistance of Maximum Capacity (percentage) | 10% |
Surface Treatment | Baked enamel finish |
Coupler | 3/8NPT-18 |
Weight (kg) | 92 |
Dimensions
Collapsed Height/mm(A) | 359 |
Extended Height/mm(B) | 559 |
Outside Dia/mm(D) | 205 |
Cylinder Bore Dia/mm(E) | 130 |
Plunger Dia/mm(F) | Tr160×6 |
Base To Advance Port/mm(H) | 39 |
Standard Saddle Dia/mm(J) | 130 |
Saddle Protri. From Plgr./mm(K) | 2 |
Depth of Plunger Hole/mm(L) | 25 |
Lock Nut Height/mm(S) | 44 |
Saddle Dia/mm(J1) | 130 |
Saddle Height/mm(K1) | 20 |
Saddle Model Number | CAT-200 |
Series Comparison
Model Number | Capacity/Ton | Stroke/mm | Cylinder Effective Area/cm2 | Oil Capacity/cm3 | Collapsed Height/mm(A) | Extended Height/mm(B) | Outside Dia/mm(D) | Cylinder Bore Dia/mm(E) | Plunger Dia/mm(F) | Base To Advance Port/mm(H) | Standard Saddle Dia/mm(J) | Saddle Protri. From Plgr./mm(K) | Depth of Plunger Hole/mm(L) | Lock Nut Height/mm(S) | Saddle Dia/mm(J1) | Saddle Height/mm(K1) | Saddle Model Number | Weight/Kg |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
CLL-502 | 50 | 50 | 70.8 | 354 | 164 | 214 | 125 | 71 | Tr 95×4 | 30 | 71 | 2 | 13 | 36 | 71 | 24 | CAT-100 | 15 |
CLL-504 | 50 | 100 | 70.8 | 708 | 214 | 314 | 125 | 71 | Tr 95×4 | 30 | 71 | 2 | 13 | 36 | 71 | 24 | CAT-100 | 20 |
CLL-506 | 50 | 150 | 70.8 | 1062 | 264 | 414 | 125 | 71 | Tr 95×4 | 30 | 71 | 2 | 13 | 36 | 71 | 24 | CAT-100 | 25 |
CLL-508 | 50 | 200 | 70.8 | 1416 | 314 | 514 | 125 | 71 | Tr 95×4 | 30 | 71 | 2 | 13 | 36 | 71 | 24 | CAT-100 | 30 |
CLL-5010 | 50 | 250 | 70.8 | 1770 | 364 | 614 | 125 | 71 | Tr 95×4 | 30 | 71 | 2 | 13 | 36 | 71 | 24 | CAT-100 | 35 |
CLL-5012 | 50 | 300 | 70.8 | 2124 | 414 | 714 | 125 | 71 | Tr 95×4 | 30 | 71 | 2 | 13 | 36 | 71 | 24 | CAT-100 | 40 |
CLL-1002 | 100 | 50 | 132.7 | 663.5 | 187 | 237 | 165 | 71 | Tr 130×6 | 30 | 71 | 2 | 13 | 44 | 71 | 24 | CAT-100 | 30 |
CLL-1004 | 100 | 100 | 132.7 | 1327 | 237 | 337 | 165 | 71 | Tr 130×6 | 30 | 71 | 2 | 13 | 44 | 71 | 24 | CAT-100 | 39 |
CLL-1006 | 100 | 150 | 132.7 | 1990.5 | 287 | 437 | 165 | 71 | Tr 130×6 | 30 | 71 | 2 | 13 | 44 | 71 | 24 | CAT-100 | 48 |
CLL-1008 | 100 | 200 | 132.7 | 2654 | 337 | 537 | 165 | 71 | Tr 130×6 | 30 | 71 | 2 | 13 | 44 | 71 | 24 | CAT-100 | 56 |
CLL-10010 | 100 | 250 | 132.7 | 3317.5 | 387 | 637 | 165 | 71 | Tr 130×6 | 30 | 71 | 2 | 13 | 44 | 71 | 24 | CAT-100 | 64 |
CLL-10012 | 100 | 300 | 132.7 | 3981 | 437 | 737 | 165 | 71 | Tr 130×6 | 30 | 71 | 2 | 13 | 44 | 71 | 24 | CAT-100 | 73 |
CLL-1502 | 150 | 50 | 201 | 1005 | 209 | 259 | 205 | 130 | Tr160×6 | 39 | 130 | 2 | 25 | 44 | 130 | 20 | CAT-200 | 53 |
CLL-1504 | 150 | 100 | 201 | 2010 | 259 | 359 | 205 | 130 | Tr160×6 | 39 | 130 | 2 | 25 | 44 | 130 | 20 | CAT-200 | 66 |
CLL-1506 | 150 | 150 | 201 | 3015 | 309 | 459 | 205 | 130 | Tr160×6 | 39 | 130 | 2 | 25 | 44 | 130 | 20 | CAT-200 | 78 |
CLL-1508 | 150 | 200 | 201 | 4020 | 359 | 559 | 205 | 130 | Tr160×6 | 39 | 130 | 2 | 25 | 44 | 130 | 20 | CAT-200 | 92 |
CLL-15010 | 150 | 250 | 201 | 5025 | 409 | 659 | 205 | 130 | Tr160×6 | 39 | 130 | 2 | 25 | 44 | 130 | 20 | CAT-200 | 104 |
CLL-15012 | 150 | 300 | 201 | 6030 | 459 | 759 | 205 | 130 | Tr160×6 | 39 | 130 | 2 | 25 | 44 | 130 | 20 | CAT-200 | 117 |
CLL-2002 | 200 | 50 | 268.8 | 1417 | 243 | 293 | 235 | 130 | Tr185×6 | 50 | 130 | 2 | 25 | 50 | 130 | 20 | CAT-200 | 83 |
CLL-2006 | 200 | 150 | 268.8 | 4251 | 343 | 493 | 235 | 130 | Tr185×6 | 50 | 130 | 2 | 25 | 50 | 130 | 20 | CAT-200 | 118 |
CLL-20012 | 200 | 300 | 268.8 | 7085 | 443 | 693 | 235 | 130 | Tr185×6 | 50 | 130 | 2 | 25 | 50 | 130 | 20 | CAT-200 | 153 |
CLL-2502 | 250 | 50 | 362.9 | 1814.5 | 249 | 299 | 275 | 150 | Tr 215×6 | 50 | 150 | 2 | 25 | 56 | 150 | 21 | CAT-250 | 116 |
CLL-2506 | 250 | 150 | 362.9 | 5443.5 | 349 | 499 | 275 | 150 | Tr 215×6 | 50 | 150 | 2 | 25 | 56 | 150 | 21 | CAT-250 | 163 |
CLL-25012 | 250 | 300 | 362.9 | 9072.5 | 449 | 699 | 275 | 150 | Tr 215×6 | 50 | 150 | 2 | 25 | 56 | 150 | 21 | CAT-250 | 210 |
CLL-3002 | 300 | 50 | 452.2 | 2261 | 295 | 345 | 310 | 139 | Tr 240×6 | 59 | 139 | 5 | 25 | 60 | 195 | 75 | CAT-300 | 173 |
CLL-3006 | 300 | 150 | 452.2 | 6783 | 395 | 545 | 310 | 139 | Tr 240×6 | 59 | 139 | 5 | 25 | 60 | 195 | 75 | CAT-300 | 233 |
CLL-30012 | 300 | 300 | 452.2 | 11305 | 495 | 745 | 310 | 139 | Tr 240×6 | 59 | 139 | 5 | 25 | 60 | 195 | 75 | CAT-300 | 293 |
CLL-4002 | 400 | 50 | 572 | 2905 | 335 | 385 | 350 | 159 | Tr 265×6 | 70 | 159 | 5 | 25 | 70 | 225 | 85 | CAT-400 | 251 |
CLL-4006 | 400 | 150 | 572 | 8715 | 435 | 585 | 350 | 159 | Tr 265×6 | 70 | 159 | 5 | 25 | 70 | 225 | 85 | CAT-400 | 327 |
CLL-40012 | 400 | 300 | 572 | 14525 | 535 | 785 | 350 | 159 | Tr 265×6 | 70 | 159 | 5 | 25 | 70 | 225 | 85 | CAT-400 | 403 |
CLL-5002 | 500 | 50 | 730.2 | 3651 | 375 | 425 | 400 | 179 | Tr 305×6 | 80 | 179 | 5 | 25 | 80 | 250 | 91 | CAT-500 | 367 |
CLL-5006 | 500 | 150 | 730.2 | 10953 | 475 | 625 | 400 | 179 | Tr 305×6 | 80 | 179 | 5 | 25 | 80 | 250 | 91 | CAT-500 | 467 |
CLL-50012 | 500 | 300 | 730.2 | 18255 | 575 | 825 | 400 | 179 | Tr 305×6 | 80 | 179 | 5 | 25 | 80 | 250 | 91 | CAT-500 | 568 |
CLL-6002 | 600 | 50 | 854.9 | 4274.5 | 395 | 445 | 430 | 194 | Tr 330×6 | 85 | 194 | 5 | 25 | 85 | 275 | 96 | CAT-600 | 447 |
CLL-6006 | 600 | 150 | 854.9 | 12823.5 | 495 | 645 | 430 | 194 | Tr 330×6 | 85 | 194 | 5 | 25 | 85 | 275 | 96 | CAT-600 | 563 |
CLL-60012 | 600 | 300 | 854.9 | 21372.5 | 595 | 845 | 430 | 194 | Tr 330×6 | 85 | 194 | 5 | 25 | 85 | 275 | 96 | CAT-600 | 680 |
CLL-8002 | 800 | 50 | 1163.6 | 5818 | 455 | 505 | 505 | 224 | Tr 385×6 | 100 | 224 | 5 | 25 | 100 | 320 | 123 | CAT-800 | 711 |
CLL-8006 | 800 | 150 | 1163.6 | 17454 | 555 | 705 | 505 | 224 | Tr 385×6 | 100 | 224 | 5 | 25 | 100 | 320 | 123 | CAT-800 | 871 |
CLL-80012 | 800 | 300 | 1163.6 | 29090 | 655 | 905 | 505 | 224 | Tr 385×6 | 100 | 224 | 5 | 25 | 100 | 320 | 123 | CAT-800 | 1031 |
CLL-10002 | 1000 | 50 | 1451.5 | 7257.5 | 495 | 545 | 560 | 249 | Tr 430×6 | 110 | 249 | 5 | 25 | 110 | 360 | 136 | CAT-1000 | 951 |
CLL-10006 | 1000 | 150 | 1451.5 | 21772.5 | 595 | 745 | 560 | 249 | Tr 430×6 | 110 | 249 | 5 | 25 | 110 | 360 | 136 | CAT-1000 | 1143 |
CLL-100012 | 1000 | 300 | 1451.5 | 36287.5 | 695 | 945 | 560 | 249 | Tr 430×6 | 110 | 249 | 5 | 25 | 110 | 360 | 136 | CAT-1000 | 1335 |