JHA73,7 Ton 76mm Stroke, Aluminum Hydraulic Bottle Jack

RIVERLAKE gas-powered hydraulic pumps are the perfect choice to provide energy for hydraulic equipment when access to electricity is limited. it has a compact structure, strong maneuverability, lightness, and a beautiful appearance.

RACL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding. RACL-Series cylinders…

RIVERLAKE supplies a wide range of electric hydraulic bolt tensioner pumps and our ultra-high-pressure electric tensioner pump series comes with various operating pressures for your selection:150Mpa,200Mpa,250Mpa, 280Mpa,400Mpa.

RIVERLAKE manufacturers H-type manual and electric powered hydraulic workshop press with a capacity ranging from 10 ton to 200 ton. our products are widely commonly used for forging, clinching, molding, blanking, punching, deep drawing, and metal forming operations. The RIVERLAKE hydraulic press is advantageous in manufacturing, it gives the ability to create more intricate shapes…

RIVERLAKE HDC series is a newly designed high-quality double-acting hydraulic cylinder. This series of hydraulic cylinders exceeds other world-renowned brands in terms of quality and functional design. This series of hydraulic cylinders supports flexible customization requirements with rated loads ranging from 50 to 1000 tons and strokes ranging from 50 to 2000mm. HDC hydraulic cylinders…

The multi-purpose RIVERLAKE Reversible jaw pullers are suitable for internal and external pulling of bearings and other components. The standard range of eight pullers can accommodate a wide range of bearing and component sizes. The four largest TMMR..F pullers are also available with extra long arms as a standard option (TMMR ….XL). The extra long…

The RR-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

One of the most common ways to dismount small to medium size bearings is to use a mechanical puller. The RIVERLAKE TMMP3 series is a three arm puller for small to medium sized bearings. It helps the user to safeguard against damage to the bearing or to the bearing seating during dismounting. The RIVERLAKE Standard…

Hydraulic puller sets include detachable hydraulic cylinders and a choice of pump options, along with a gauge assembly and hose for safe monitoring of applied pulling forces.

The RAC-SERIES is a general-purpose lightweight aluminum cylinder designed for use in production, Maintenance, and fabrication applications. All RAC cylinders are equipped with bolt-on removable hardened steel saddles and are available in various capacities from 20 tons to 150 with a stroke from 50 mm to 250mm.

Our hydraulic pull cylinders are specially designed for applications that require a large pulling force. Our pull cylinders feature a single-acting design and are equipped with a replaceable clevis eye. All model’s pulling capacity range from 2.5-ton to 50-ton and are widely used in tensioning and pulling applications.

RIVERLAKE manual manifold type synchronous lifting pumps are enconomic solutions to synchronous lifting operations with a low accuracy requirement.The pump can control multiple lifting points with the help of hydraulic distribution manifold and needle valve.