Pentagonal Reaction Arms (For Impellers)
Send us inquiry
Became a distributor
You May Be Interested In

RAC5010, 50 Ton Capacity, 250mm Stroke, Single Acting General Purpose Aluminum Hydraulic Cylinders
The RAC-SERIES is a general-purpose lightweight aluminum cylinder designed for use in production, Maintenance, and fabrication applications. All RAC cylinders are equipped with bolt-on removable hardened steel saddles and are available in various capacities from 20 tons to 150 with a stroke from 50 mm to 250mm.

IPE-5060, 50 Ton, H Frame Hydraulic Workshop Press With Electric Pump
RIVERLAKE manufacturers H-type manual and electric powered hydraulic workshop press with a capacity ranging from 10 ton to 200 ton. our products are widely commonly used for forging, clinching, molding, blanking, punching, deep drawing, and metal forming operations. The RIVERLAKE hydraulic press is advantageous in manufacturing, it gives the ability to create more intricate shapes…

NS110130, M76-M90, Heavy Duty Hydraulic Nut Splitter
RIVERLAKE hydraulic nut splitters are a simple, fast, safe, and efficient tool to remove the bolt and nut. In the open-air high temperature or corrosive environment, the bolt is usually bitten by rust and damaged by smashing, It is very difficult to remove them In the past. With the help of our hydraulic bolt cutters,…

P802, Two Speed, Portable Hydraulic Hand Pump
RIVERLAKE’s lightweight hand pumps come with a compact design and lightweight construction for easy carrying. Two-speed lightweight hand pump models offer reduced handle strokes and lower handle effort to minimize operator fatigue.

HCG20012, 200 ton Capacity, 300mm Stroke, Single-Acting, High Tonnage Hydraulic Cylinder
The RIVERLAKE HCG series offers high-capacity single-acting cylinders featuring a load return plunger for simple operation with fewer components to maintain, enhanced by a nitrocarburized finish providing superior resistance to side-loading and cyclic wear, ensuring consistent 10% side-load resistance throughout the full stroke; safety is prioritized with a stop-ring preventing plunger blow-out, certified lifting eyes,…

EX-EPW,Anti-Explosion Electric Hydraulic Bolt Tensioner Pump
RIVERLAKE supplies a wide range of electric hydraulic bolt tensioner pumps and our ultra-high-pressure electric tensioner pump series comes with various operating pressures for your selection:150Mpa,200Mpa,250Mpa, 280Mpa,400Mpa.

BRC46, 5 Ton Capacity, 140mm Stroke, Pull Hydraulic Cylinder
Our hydraulic pull cylinders are specially designed for applications that require a large pulling force. Our pull cylinders feature a single-acting design and are equipped with a replaceable clevis eye. All model’s pulling capacity range from 2.5-ton to 50-ton and are widely used in tensioning and pulling applications.

TMS Series, Torque Multipliers
RIVERLAKE manufactures and supplies a broad range of torque multipliers with various output torques. Our torque multipliers provides accurate, efficient torque multiplication for make-up or breakout of joint fasteners.

CLSG506, 50 Ton Capacity, 150mm Stroke, Single Acting High Tonnage Hydraulic Cylinders
The CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.

HCRL25010, 250 Ton Capacity, 250mm Stroke, Double Acting Lock Nut Hydraulic Cylinders
HCRL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding.

CLSG6006, 600 Ton Capacity, 150mm Stroke, Single Acting High Tonnage Hydraulic Cylinders
The CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.

P391, Two Speed, Lightweight Hydraulic Hand Pump
RIVERLAKE’s lightweight hand pumps come with a compact design and lightweight construction for easy carrying. Two-speed lightweight hand pump models offer reduced handle strokes and lower handle effort to minimize operator fatigue.