RARH6010, 60 Ton Capacity, 250mm Stroke, Double Acting Hollow Plunger Aluminum Hydraulic Cylinders

The CLRG-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

RIVERLAKE manufacturers H-type manual and electric powered hydraulic workshop press with a capacity ranging from 10 ton to 200 ton. our products are widely commonly used for forging, clinching, molding, blanking, punching, deep drawing, and metal forming operations. The RIVERLAKE hydraulic press is advantageous in manufacturing, it gives the ability to create more intricate shapes…

The CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.

The CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.

RIVERLAKE low-profile hollow hydraulic torque wrenches are made of high-strength aluminum- a strong and durable titanium alloy. Our high torque hydraulic wrenches come with a max torque range of 180000Nm for your selection. Adopting a precision ratchet and power mechanical design, the wrench’s accuracy is as high as ±3%.

The longer stroke length of telescopic hydraulic cylinders will save you time and simplify projects by moving a load a greater distance and eliminating the use of temporary cribbing. Baked enamel finish provides unparalleled corrosion protection for safe use in the harshest conditions.

Our Post Tensioning/Stressing Jacks consist of both single and double-acting models with spring and power wedge capabilities. The jacks come with a 10-inch stroke and have either a 20 or 30-ton capacity. The jacks can adapt to strand sizes of 0.5″ and 0.6″ diameter strand and may be used with various types of anchors, wedges,…

The RAC-SERIES is a general-purpose lightweight aluminum cylinder designed for use in production, Maintenance, and fabrication applications. All RAC cylinders are equipped with bolt-on removable hardened steel saddles and are available in various capacities from 20 tons to 150 with a stroke from 50 mm to 250mm.

RIVERLAKE HDC series is a newly designed high-quality double-acting hydraulic cylinder. This series of hydraulic cylinders exceeds other world-renowned brands in terms of quality and functional design. This series of hydraulic cylinders supports flexible customization requirements with rated loads ranging from 50 to 1000 tons and strokes ranging from 50 to 2000mm. HDC hydraulic cylinders…

RIVERLAKE manufactures and supplies a broad range of torque multipliers with various output torques. Our torque multipliers provides accurate, efficient torque multiplication for make-up or breakout of joint fasteners.

RIVERLAKE’s lightweight hand pumps come with a compact design and lightweight construction for easy carrying. Two-speed lightweight hand pump models offer reduced handle strokes and lower handle effort to minimize operator fatigue.

The RAR-SERIES is a general-purpose double acting lightweight aluminum cylinder designed for use in production, Maintenance, and fabrication applications. All RAR cylinders are equipped with bolt-on removable hardened steel saddles and are available in various capacities from 20 tons to 150 with a stroke from 50 mm to 250mm.