Elastic Extension Rods (For Wheel Hubs)
Send us inquiry
Became a distributor
You May Be Interested In

BRC106, 10 Ton Capacity, 151mm Stroke, Pull Hydraulic Cylinder
Our hydraulic pull cylinders are specially designed for applications that require a large pulling force. Our pull cylinders feature a single-acting design and are equipped with a replaceable clevis eye. All model’s pulling capacity range from 2.5-ton to 50-ton and are widely used in tensioning and pulling applications.

UK-50, 50 Ton Integral Hydraulic Puller
RIVERLAKE integral hydraulic pullers come with a built-in hydraulic hand pump, with no need for an extra hand pump and hydraulic hoses set up. Our integral pullers’ capacity range from 4 tons to 50 tons and are portable tools for bearing removal applications

40SWT, 4509-45090Nm, Super Thin Low Profile Hydraulic Torque Wrench
RIVERLAKE low-profile hollow hydraulic torque wrenches are made of high-strength aluminum- a strong and durable titanium alloy. Our high torque hydraulic wrenches come with a max torque range of 180000Nm for your selection. Adopting a precision ratchet and power mechanical design, the wrench’s accuracy is as high as ±3%.

CLL80012, 800 Ton Capacity, 300mm Stroke, Single Acting Lock Nut Hydraulic Cylinders
CLL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding. All CLL-Series…

HCR3008, 300 ton Capacity, 200mm Stroke, Double-Acting, High Tonnage Hydraulic Cylinder
HCR Series Hydraulic Cylinders are double-acting which delivers a faster and more controlled return of the plunger compared to load/gravity return equivalents.riverlake High-Tonnage Cylinders are equipped with numerous special features to ensure the durability, safety, and performance needed for large-scale construction projects. Among these features are low-wear high-pressure seals, replaceable composite plunger support bearings, and…

BRP106C, 10 Ton Capacity, 151mm Stroke, Pull Hydraulic Cylinder
Our hydraulic pull cylinders are specially designed for applications that require a large pulling force. Our pull cylinders feature a single-acting design and are equipped with a replaceable clevis eye. All model’s pulling capacity range from 2.5-ton to 50-ton and are widely used in tensioning and pulling applications.

CLL2002, 200 Ton Capacity, 50mm Stroke, Single Acting Lock Nut Hydraulic Cylinders
CLL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding. All CLL-Series…

RC2510, 25 Ton Capacity, 261mm Stroke, General Purpose Hydraulic Cylinder
The RC-SERIES is a general-purpose spring return cylinder designed for use in production, Maintenance, and fabrication applications. All RC-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance. When combined with the bronze overlay on the piston bearing area and low friction surface treatment on the gland nut, this cylinder…

HCL3002, 300 ton Capacity, 50 mm Stroke, High Tonnage Lock Nut Hydraulic Cylinder
High Tonnage single-acting load return hydraulic cylinder with lock nut. For demanding high-capacity lifting applications that require safe mechanical locking for extended periods

TFA12TEMIN, 13.5 Ton, Hydraulic Wind Tower Flange Alignment Tool Set
The flange alignment tool is suitable for the alignment or realignment of flange joints in routine maintenance of pipelines. The tool is attached to the flange joint where misalignment is at its greatest and then simply pushes and pulls the flange into correct alignment(Except FA9TESTD). The flange alignment tools rectify twist and rotational misalignment quickly,…

CLRG8006, 800 Ton Capacity, 150mm Stroke, Double Acting General Purpose Hydraulic Cylinder
The CLRG-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

HCR2504, 250 ton Capacity, 100mm Stroke, Double-Acting, High Tonnage Hydraulic Cylinder
HCR Series Hydraulic Cylinders are double-acting which delivers a faster and more controlled return of the plunger compared to load/gravity return equivalents.riverlake High-Tonnage Cylinders are equipped with numerous special features to ensure the durability, safety, and performance needed for large-scale construction projects. Among these features are low-wear high-pressure seals, replaceable composite plunger support bearings, and…