Sliding Reaction Arms (Adjustable Center Distance)
Send us inquiry
Became a distributor
You May Be Interested In

EPH-116, 60 Ton, 3 Jaws, Safety Cage Hydraulic Puller
RIVERLAKE safety cage hydraulic pullers are more efficient than traditional pullers, as one person can do the job whereas traditional pullers often require two operators. The opening, closing, locking, and aligning of the jaws are all done automatically by simply turning the T-handle.

EP-108, 17 Ton, 3 Jaws, Safety Cage Mechanical Puller
RIVERLAKE safety cage hydraulic pullers are more efficient than traditional pullers, as one person can do the job whereas traditional pullers often require two operators. The opening, closing, locking, and aligning of the jaws are all done automatically by simply turning the T-handle.

Pentagonal Reaction Arms (For Rims)
RIVERLAKE produces and sells various non-standard torque wrench reaction arms: extended reaction arms, sliding reaction arms (adjustable center distance), sliding extension rods (for wheel hubs), elastic extension rods (for wheel hubs), curved reaction arms, reaction arms (for rims), pentagonal reaction arms (for rims), and pentagonal reaction arms (for impellers).

TW60, M60 Wind Turbine Hydraulic Tensioners
Engineered exclusively for critical bolting in wind energy infrastructure, the RIVERLAKE TW Series delivers precision tensioning at 150MPa within confined nacelle spaces. Combining intelligent automation and extreme durability, it redefines efficiency for tower flange, blade bearing, and gearbox bolt maintenance.

UK-12inCB, 12 Ton Integral Hydraulic Cobra Puller
RIVERLAKE integral hydraulic pullers come with a built-in hydraulic hand pump, with no need for an extra hand pump and hydraulic hoses set up. Our integral pullers’ capacity range from 10 tons to 50 tons and are portable tools for bearing removal applications

RR40048, 440 Ton Capacity, 1219mm Stroke, Long Stroke Double Acting Hydraulic Cylinders
The RR-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

EPH-113, 25 Ton, 3 Jaws, Safety Cage Hydraulic Puller
RIVERLAKE safety cage hydraulic pullers are more efficient than traditional pullers, as one person can do the job whereas traditional pullers often require two operators. The opening, closing, locking, and aligning of the jaws are all done automatically by simply turning the T-handle.

RACL10010, 100 Ton Capacity, 250mm Stroke, Single Acting Aluminum Lock Nut Hydraulic Cylinders
RACL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding. RACL-Series cylinders…

TMMR 160XL, 5 Ton, Reversible Jaw Puller
The multi-purpose RIVERLAKE Reversible jaw pullers are suitable for internal and external pulling of bearings and other components. The standard range of eight pullers can accommodate a wide range of bearing and component sizes. The four largest TMMR..F pullers are also available with extra long arms as a standard option (TMMR ….XL). The extra long…

HCR8008, 800 ton Capacity, 200mm Stroke, Double-Acting, High Tonnage Hydraulic Cylinder
HCR Series Hydraulic Cylinders are double-acting which delivers a faster and more controlled return of the plunger compared to load/gravity return equivalents.riverlake High-Tonnage Cylinders are equipped with numerous special features to ensure the durability, safety, and performance needed for large-scale construction projects. Among these features are low-wear high-pressure seals, replaceable composite plunger support bearings, and…

CLSG504, 50 Ton Capacity, 100mm Stroke, Single Acting High Tonnage Hydraulic Cylinders
The CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.

RR50036, 520 Ton Capacity, 915mm Stroke, Long Stroke Double Acting Hydraulic Cylinders
The RR-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.