Reaction Arms (For Rims)
Send us inquiry
Became a distributor
You May Be Interested In
LGHS310H, 10 Ton, 3 Jaw, Hydraulic Lock-Grip Puller Set with Hand Pump
Hydraulic puller sets include detachable hydraulic cylinders and a choice of pump options, along with a gauge assembly and hose for safe monitoring of applied pulling forces.
UK-20, 20 Ton Integral Hydraulic Puller
RIVERLAKE integral hydraulic pullers come with a built-in hydraulic hand pump, with no need for an extra hand pump and hydraulic hoses set up. Our integral pullers’ capacity range from 4 tons to 50 tons and are portable tools for bearing removal applications
RR5020, 50 Ton Capacity, 511mm Stroke, Long Stroke Double Acting Hydraulic Cylinders
The RR-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.
TMMP3X300, 3 Jaw, Standard Jaw Puller
One of the most common ways to dismount small to medium size bearings is to use a mechanical puller. The RIVERLAKE TMMP3 series is a three arm puller for small to medium sized bearings. It helps the user to safeguard against damage to the bearing or to the bearing seating during dismounting. The RIVERLAKE Standard…
CLRG5012, 50 Ton Capacity, 300mm Stroke, Double Acting General Purpose Hydraulic Cylinder
The CLRG-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.
HCRL5012, 50 Ton Capacity, 300mm Stroke, Double Acting Lock Nut Hydraulic Cylinders
HCRL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding.
RC156, 15 Ton Capacity, 152mm Stroke, General Purpose Hydraulic Cylinder
The RC-SERIES is a general-purpose spring return cylinder designed for use in production, Maintenance, and fabrication applications. All RC-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance. When combined with the bronze overlay on the piston bearing area and low friction surface treatment on the gland nut, this cylinder…
HCL506, 50 ton Capacity, 150 mm Stroke, High Tonnage Lock Nut Hydraulic Cylinder
High Tonnage single-acting load return hydraulic cylinder with lock nut. For demanding high-capacity lifting applications that require safe mechanical locking for extended periods
CLSG15012, 150 Ton Capacity, 300mm Stroke, Single Acting High Tonnage Hydraulic Cylinders
The CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.
BH20, 20 Ton Self-Centering Hydraulic Grip Puller
RIVERLAKE split type hydraulic pullers are used to remove shaft-fitted parts (bearings or couplings). Riverlake’s hydraulic pullers capacity range from 10 tons to 100 tons. In addition to railway vehicle maintenance, mechanical installation, mine maintenance, construction support, it can also disassemble circular workpieces such as pulleys, gears, and bearings in various mechanical equipment.
UKS,6-15 Ton Integral Puller Combination Set
RIVERLAKE integral hydraulic pullers combination set consists of an integral three jaw hydraulic puller and a tri-section pulling plate.The integral puller come with a built-in hydraulic hand pump, with no need for an extra hand pump and hydraulic hoses set up. The combination is to avoid bearing damage.
PGM-L, Gasoline Engine Powered Hydraulic Power Pack
RIVERLAKE gas-powered hydraulic pumps are the perfect choice to provide energy for hydraulic equipment when access to electricity is limited. it has a compact structure, strong maneuverability, lightness, and a beautiful appearance.