Curved Reaction Arms

RIVERLAKE safety cage hydraulic pullers are more efficient than traditional pullers, as one person can do the job whereas traditional pullers often require two operators. The opening, closing, locking, and aligning of the jaws are all done automatically by simply turning the T-handle.

The RR-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

Our Super-Thin Open End Wrenches have ultra-low profiles that let you reach fasteners in tight clearance. This Hydraulic Torque Wrench can be used for a wide range of applications, even in the most confined applications.

RT Series pullers are equipped with a through-hole design for additional applications and use for pulling requiring high force.

RIVERLAKE integral hydraulic pullers come with a built-in hydraulic hand pump, with no need for an extra hand pump and hydraulic hoses set up.

HCRL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding.

CLL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding. All CLL-Series…

Engineered exclusively for critical bolting in wind energy infrastructure, the RIVERLAKE TW Series delivers precision tensioning at 150MPa within confined nacelle spaces. Combining intelligent automation and extreme durability, it redefines efficiency for tower flange, blade bearing, and gearbox bolt maintenance.

The flange alignment tool is suitable for the alignment or realignment of flange joints in routine maintenance of pipelines. The tool is attached to the flange joint where misalignment is at its greatest and then simply pushes and pulls the flange into correct alignment(Except FA9TESTD). The flange alignment tools rectify twist and rotational misalignment quickly,…

HCR Series Hydraulic Cylinders are double-acting which delivers a faster and more controlled return of the plunger compared to load/gravity return equivalents.riverlake High-Tonnage Cylinders are equipped with numerous special features to ensure the durability, safety, and performance needed for large-scale construction projects. Among these features are low-wear high-pressure seals, replaceable composite plunger support bearings, and…

The hollow piston allows for a rod or cable to be inserted through the entire body length, while the double-acting design improves the speed of operation when longer stroke cylinders are required. They can be used in tensioning, load testing, bush extracting, and maintenance applications. All cylinders in this range have base mounting holes.

The longer stroke length of telescopic hydraulic cylinders will save you time and simplify projects by moving a load a greater distance and eliminating the use of temporary cribbing. Baked enamel finish provides unparalleled corrosion protection for safe use in the harshest conditions.