SCH306, 30 Ton Porta Power, Hollow Hydraulic Cylinder And Hand Pump Set

The RAR-SERIES is a general-purpose double acting lightweight aluminum cylinder designed for use in production, Maintenance, and fabrication applications. All RAR cylinders are equipped with bolt-on removable hardened steel saddles and are available in various capacities from 20 tons to 150 with a stroke from 50 mm to 250mm.

The RIVERLAKE HCG series offers high-capacity single-acting cylinders featuring a load return plunger for simple operation with fewer components to maintain, enhanced by a nitrocarburized finish providing superior resistance to side-loading and cyclic wear, ensuring consistent 10% side-load resistance throughout the full stroke; safety is prioritized with a stop-ring preventing plunger blow-out, certified lifting eyes,…

RIVERLAKE integral hydraulic pullers come with a built-in hydraulic hand pump, with no need for an extra hand pump and hydraulic hoses set up. Our integral pullers’ capacity range from 4 tons to 15 tons and are portable tools for bearing removal applications

HCR Series Hydraulic Cylinders are double-acting which delivers a faster and more controlled return of the plunger compared to load/gravity return equivalents.riverlake High-Tonnage Cylinders are equipped with numerous special features to ensure the durability, safety, and performance needed for large-scale construction projects. Among these features are low-wear high-pressure seals, replaceable composite plunger support bearings, and…

RIVERLAKE manufacturers H-type manual and electric powered hydraulic workshop press with a capacity ranging from 10 ton to 200 ton. our products are widely commonly used for forging, clinching, molding, blanking, punching, deep drawing, and metal forming operations. The RIVERLAKE hydraulic press is advantageous in manufacturing, it gives the ability to create more intricate shapes…

RIVERLAKE produces and sells various non-standard torque wrench reaction arms: extended reaction arms, sliding reaction arms (adjustable center distance), sliding extension rods (for wheel hubs), elastic extension rods (for wheel hubs), curved reaction arms, reaction arms (for rims), pentagonal reaction arms (for rims), and pentagonal reaction arms (for impellers).

Hydraulic puller sets include detachable hydraulic cylinders and a choice of pump options, along with a gauge assembly and hose for safe monitoring of applied pulling forces.

RIVERLAKE split type hydraulic pullers are used to remove shaft-fitted parts (bearings or couplings).  Riverlake’s hydraulic pullers capacity range from 10 tons to 100 tons. In addition to railway vehicle maintenance, mechanical installation, mine maintenance, construction support, it can also disassemble circular workpieces such as pulleys, gears, and bearings in various mechanical equipment.

RACL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding. RACL-Series cylinders…

The RAR-SERIES is a general-purpose double acting lightweight aluminum cylinder designed for use in production, Maintenance, and fabrication applications. All RAR cylinders are equipped with bolt-on removable hardened steel saddles and are available in various capacities from 20 tons to 150 with a stroke from 50 mm to 250mm.

The RCH series is a spring return hollow piston rod cylinder. The hollow piston allows for a rod or cable to be inserted through the entire body length. They can be used in tensioning, load testing, bush extracting, and maintenance applications. All RCH-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance and…

The tri-section pulling plates, T3 series, are especially designed for use in combination with three-armed pullers. The plates grip behind the inner ring of the bearing. This prevents the pulling forces from being transmitted through the outer ring and the rolling elements, minimising the risk of bearing damage.