Reaction Arms (For Rims)

Hydraulic puller sets include detachable hydraulic cylinders and a choice of pump options, along with a gauge assembly and hose for safe monitoring of applied pulling forces.

The SWi5TI-S is a 8.7-ton integral hydraulic spreader manufactured by RIVERLAKE. It is designed to hydraulically spread flange joints with a minimum access gap of 4.0mm,flange plates can be opened up to 101mm range. Hydraulic pumps and hydraulic jacks were integrated into the 8.7 Ton Hydraulic Flange Spreader. The product thus becomes more portable and…

HCR Series Hydraulic Cylinders are double-acting which delivers a faster and more controlled return of the plunger compared to load/gravity return equivalents.riverlake High-Tonnage Cylinders are equipped with numerous special features to ensure the durability, safety, and performance needed for large-scale construction projects. Among these features are low-wear high-pressure seals, replaceable composite plunger support bearings, and…

RIVERLAKE integral hydraulic pullers come with a built-in hydraulic hand pump, with no need for an extra hand pump and hydraulic hoses set up.

The CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.

Engineered exclusively for critical bolting in wind energy infrastructure, the RIVERLAKE TW Series delivers precision tensioning at 150MPa within confined nacelle spaces. Combining intelligent automation and extreme durability, it redefines efficiency for tower flange, blade bearing, and gearbox bolt maintenance.

One of the most common ways to dismount small to medium size bearings is to use a mechanical puller. The RIVERLAKE Standard Jaw Pullers TMMP series helps the user to safeguard against damage to the bearing or to the bearing seating during dismounting. The RIVERLAKE Standard Jaw Pullers TMMP series allows for easy and fast…

HCR Series Hydraulic Cylinders are double-acting which delivers a faster and more controlled return of the plunger compared to load/gravity return equivalents.riverlake High-Tonnage Cylinders are equipped with numerous special features to ensure the durability, safety, and performance needed for large-scale construction projects. Among these features are low-wear high-pressure seals, replaceable composite plunger support bearings, and…

The RR-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

RIVERLAKE supplies full ranges of hydraulic flange spreaders, our flange spreader tools are normally used for separating flanges, widely being used in industrial applications such as pipeline maintenance, pipeline construction, testing and flange replacement, maintenance gaskets, pressure vessels, cylinder head opening, power plants, bearing disassembly, oil and electricity drilling, motor rotor disassembly, offshore platforms, jacking…

High Tonnage single-acting load return hydraulic cylinder with lock nut. For demanding high-capacity lifting applications that require safe mechanical locking for extended periods