Sliding Reaction Arms (Adjustable Center Distance)

The RC-SERIES is a general-purpose spring return cylinder designed for use in production, Maintenance, and fabrication applications. All RC-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance. When combined with the bronze overlay on the piston bearing area and low friction surface treatment on the gland nut, this cylinder…

RIVERLAKE hydraulic nut splitters are a simple, fast, safe, and efficient tool to remove the bolt and nut. In the open-air high temperature or corrosive environment, the bolt is usually bitten by rust and damaged by smashing, It is very difficult to remove them In the past. With the help of our hydraulic bolt cutters,…

The CLRG-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

The multi-purpose RIVERLAKE Reversible jaw pullers are suitable for internal and external pulling of bearings and other components. The standard range of eight pullers can accommodate a wide range of bearing and component sizes. The four largest TMMR..F pullers are also available with extra long arms as a standard option (TMMR ….XL). The extra long…

The RIVERLAKE HCG series offers high-capacity single-acting cylinders featuring a load return plunger for simple operation with fewer components to maintain, enhanced by a nitrocarburized finish providing superior resistance to side-loading and cyclic wear, ensuring consistent 10% side-load resistance throughout the full stroke; safety is prioritized with a stop-ring preventing plunger blow-out, certified lifting eyes,…

HCRL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding.

CULP-Series Low Profile Hydraulic Pancake Cylinders are ulta-flat, single-acting load return and include a stop ring to limit the maximum stroke. All models are finished with a baked enamel finish for enhanced durability and corrosion protection in harsh working environments.

The RR-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

RARH-Series Lightweight, Hollow Hydraulic Cylinders are hollow and double-acting to exert both pull and push with hydraulic force. RARH Cylinders include a steel base plate and bolt-on hardened steel removable saddle.

RIVERLAKE Portable electric hydraulic power pack series come with a small motor and oil tank, which makes them lightweight and easy to carry on the worksite. The brushless motor and thermal overload protector guarantee long service life. The built-in safety valve provides a personal safety guarantee.

RIVERLAKE’s RLT Series represents the pinnacle of space-optimized hydraulic actuation technology. These single-acting telescopic cylinders deliver exceptional power density while maintaining an ultra-compact collapsed height, making them ideal for machinery positioning and tool fastening applications where installation envelope is critical.

The flange alignment tool is suitable for the alignment or realignment of flange joints in routine maintenance of pipelines. The tool is attached to the flange joint where misalignment is at its greatest and then simply pushes and pulls the flange into correct alignment(Except FA9TESTD). The flange alignment tools rectify twist and rotational misalignment quickly,…