HE80150LL-8, 2 L/min,4KW,8 Point Synchronous Jacking System

The tri-section pulling plates, T3 series, are especially designed for use in combination with three-armed pullers. The plates grip behind the inner ring of the bearing. This prevents the pulling forces from being transmitted through the outer ring and the rolling elements, minimising the risk of bearing damage.

RIVERLAKE’s lightweight hand pumps come with a compact design and lightweight construction for easy carrying. Two-speed lightweight hand pump models offer reduced handle strokes and lower handle effort to minimize operator fatigue.

The RCS series is a spring return, compact flat cylinder designed for use in narrow spaces and areas with low overhead clearance. They can be used in maintenance, machinery leveling, construction, and mining applications. RCS-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance and bronze overlay piston bearing area…

RIVERLAKE HDC series is a newly designed high-quality double-acting hydraulic cylinder. This series of hydraulic cylinders exceeds other world-renowned brands in terms of quality and functional design. This series of hydraulic cylinders supports flexible customization requirements with rated loads ranging from 50 to 1000 tons and strokes ranging from 50 to 2000mm. HDC hydraulic cylinders…

RIVERLAKE produces and sells various non-standard torque wrench reaction arms: extended reaction arms, sliding reaction arms (adjustable center distance), sliding extension rods (for wheel hubs), elastic extension rods (for wheel hubs), curved reaction arms, reaction arms (for rims), pentagonal reaction arms (for rims), and pentagonal reaction arms (for impellers).

RIVERLAKE LGH-Series Pullers provide the same safety and ease of use as their mechanical counterparts, with the pulling force applied by a standard 10,150 psi hydraulic cylinder.Hydraulically applied pulling force increases pulling capacity, reducing operator fatigue.

RIVERLAKE TMBS series strong back puller facilitates the dismounting of bearings in applications where the use of traditional jaw pullers is restricted due to lack of space or when the application requires a long reach. The puller is operated mechanically and is especially suitable for small shaft diameters. A special separator design is used that…

The RR-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

One of the most common ways to dismount small to medium size bearings is to use a mechanical puller. The RIVERLAKE Standard Jaw Pullers TMMP series helps the user to safeguard against damage to the bearing or to the bearing seating during dismounting. The RIVERLAKE Standard Jaw Pullers TMMP series allows for easy and fast…

Compared with other flange separators, the collect style flange spreaders can separate flanges with 0mm gaps and has a larger output option (up to 25 tons). It is suitable for pipeline maintenance, repair, testing, and flange replacement applications while causing no flange damage.

RIVERLAKE EasyPull TMMA 75H is one of the most user-friendly and safest bearing dismounting tools on the market. It is very robust and ergonomically designed and features spring-operated arms that enable the user to position the puller behind the component with just one movement. The TMMA 75H is hydraulically assisted and effortless reaches withdrawl forces…

Ready-to-use hydraulic cylinder and pump sets. RIVERLAKE porta powers and sets provide the quickest and easiest way to start working right away. All kits include a single-acting hydraulic jack (ram), two-speed pump, 1.8 meters hydraulic hose, calibrated gauge, and gauge adaptor. Kits are available with 5 to 100-ton jacks (rams). Hydraulic jacks (rams) are available…