RBE3500, 3L Oil Capacity, 350Mpa Electric Bolt Tensioner Pump

The CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.

RIVERLAKE’s lightweight hand pumps come with a compact design and lightweight construction for easy carrying. Two-speed lightweight hand pump models offer reduced handle strokes and lower handle effort to minimize operator fatigue.

RIVERLAKE hydraulic nut splitters are a simple, fast, safe, and efficient tool to remove the bolt and nut. In the open-air high temperature or corrosive environment, the bolt is usually bitten by rust and damaged by smashing, It is very difficult to remove them In the past. With the help of our hydraulic bolt cutters,…

RIVERLAKE is a professional battery-powered torque wrench manufacturer in China. Our torque wrench comes with a brushless motor for longer service life. a 0.96-inch LCD screen displays the real-time working data and torque can be preset and adjusted on the digital control panel. Our battery torque wrench adopts multistage epicyclic gearing and comes with higher…

The RIVERLAKE ultra-high-pressure hydraulic hand pump product line features a compact design and comes with a variety of operating pressures for your selection:1500bar,1600bar,2100bar, and 2800 bar(40,000 psi). Made of aluminum titanium alloy, high pressure, corrosion, and impact resistance to various hash environments.

RIVERLAKE split type hydraulic pullers are used to remove shaft-fitted parts (bearings or couplings).  Riverlake’s hydraulic pullers capacity range from 10 tons to 100 tons. In addition to railway vehicle maintenance, mechanical installation, mine maintenance, construction support, it can also disassemble circular workpieces such as pulleys, gears, and bearings in various mechanical equipment.

RIVERLAKE supplies full ranges of hydraulic flange spreaders, our flange spreader tools are normally used for separating flanges, widely being used in industrial applications such as pipeline maintenance, pipeline construction, testing and flange replacement, maintenance gaskets, pressure vessels, cylinder head opening, power plants, bearing disassembly, oil and electricity drilling, motor rotor disassembly, offshore platforms, jacking…

The CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.

The CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.

The CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.

The RAR-SERIES is a general-purpose double acting lightweight aluminum cylinder designed for use in production, Maintenance, and fabrication applications. All RAR cylinders are equipped with bolt-on removable hardened steel saddles and are available in various capacities from 20 tons to 150 with a stroke from 50 mm to 250mm.

RIVERLAKE supplies full ranges of hydraulic flange spreaders, our flange spreader tools are normally used for separating flanges, widely being used in industrial applications such as pipeline maintenance, pipeline construction, testing and flange replacement, maintenance gaskets, pressure vessels, cylinder head opening, power plants, bearing disassembly, oil and electricity drilling, motor rotor disassembly, offshore platforms, jacking…