Description

Model: RACH-306

Series: RACH

Product Lines: Industrial Tools

  • The hollow plunger design allows for both pull and pushes forces
  • Composite bearings increase cylinder life and side load resistance
  • Hard coat finish on all surfaces resists damage and extends cylinder life
  • Handles included on all models
  • Floating center tube increases seal life
  • Steel baseplate and saddle for protection against load-induced damage
  • The integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
  • High-strength return spring for rapid cylinder retraction
  • Plunger wiper reduces contamination, extending cylinder life
  • Hardened alloy steel guide ring eliminates over travel and provides support to reduce wear from off-center loads
  • An Industrial U-cup style seal prevents costly leaks

Think Safety

Manufacturer’s rating of load and stroke are maximum safe limits. Good practice encourages using only 80% of these ratings!

Specifications

Maximum Operating Pressure (bar)700
Capacity Class (tonnage)30
Stroke (mm)150
Collapsed Height A (mm)333
Extended Height B (mm)483
Return TypeSingle-Acting, Spring Return
Plunger TypeHollow
Material7075-T6 Aluminum Alloy
Cylinder Effective Area Advance (cm2)51.1
Oil Capacity Advance (cm3)766
Surface TreatmentBaked enamel finish
Coupler3/8NPT-18
Weight (kg)11.2

Dimensions

Collapsed Height/mm(A)333
Extended Height/mm(B)483
Outside Dia/mm(D)130
Cylinder Bore Dia/mm(E)95
Plunger Dia/mm(F)70
Base To Advance Port/mm(H)29
Saddle Dia/mm(J)70
Saddle Protri. From Plgr./mm(K)10
Center Hole Dia/mm(Y)34
Base Mounting Holes Bolt Circle/mm(U)110
Base Mounting Holes Thread(V)M6
Base Mounting Holes Thread Depth/mm(Z)12
Single Acting Hollow Plunger Aluminum Hydraulic Cylinders Dimension Drawing

Series Comparison

Model NumberCapacity/TonStroke/mmCylinder Effective Area/cm2Oil Capacity/cm3Collapsed Height/mm(A)Extended Height/mm(B)Outside Dia/mm(D)Cylinder Bore Dia/mm(E)Plunger Dia/mm(F)Base To Advance Port/mm(H)Saddle Dia/mm(J)Saddle Protri. From Plgr./mm(K)Center Hole Dia/mm(Y)Base Mounting Holes Bolt Circle/mm(U)Base Mounting Holes Thread(V)Base Mounting Holes Thread Depth/mm(Z)Weight/Kg
RACH-202205032.716418823810075552955102770M6125.2
RACH-2042010032,732725135110075552955102770M6126.1
RACH-2062015032.749131546510075552955102770M6127.1
RACH-2082020032.765437857810075552955102770M6128
RACH-20102025032.781844269210075552955102770M6129
RACH-302305051.1256208258130957029701034110M6128
RACH-3043010051.1511267367130957029701034110M6129.5
RACH-3063015051.1766333483130957029701034110M61211.2
RACH-3083020051.11022395595130957029701034110M61212.9
RACH-30103025051.11277458708130957029701034110M61214.5
RACH-602605084.7423251301180130100611001254160M61216.2
RACH-6046010084.7847315415180130100611001254160M61219.5
RACH-6066015084.71270380530180130100611001254160M61225.6
RACH-6086020084.71694445645180130100611001254160M61226
RACH-60106025084.72117510760180130100611001254160M61229.6
RACH-100210050164.6823258308250185145611451479220M101233.8
RACH-1004100100164.61646325425250185145611451479220M101239.8
RACH-1006100150164.62487391541250185145611451479220M101246.2
RACH-1008100200164.63291459659250185145611451479220M101252.2
RACH-10010100250164.64114527777250185145611451479220M101258.8
RACH-150215050225.81129280330275205150611451479245M101248.9
RACH-1504150100225.82258360460275205150611451479245M101255.7
RACH-1506150150225.83387430580275205150611451479245M101263
RACH-1508150200225.84517500700275205150611451479245M101270.1
RACH-15010150250225.85646570820275205150611451479245M101277.2