RFW40, Max Torque 4000Nm, Pneumatic Torque Wrench

RIVERLAKE RFW series pneumatic torque wrench adopts a standard air motor and high-precision planetary gearbox, with an accuracy of ±5%, lightweight, and high-cost performance. It is suitable for maintenance work that pursues high efficiency and high-cost performance.

Send us inquiry

For inquiries about our products, please email us your detailed requirements and we will be in touch within 24 hours.

Send Email

Became a distributor

Please email us your company information and we will be in touch within 24 hours.

Description

Model: RFW40

Series: RFW

Product Lines: Industrial Tools

The extremely excellent power-to-weight ratio, and wider torque range, suitable for multiple stations
Using a multi-stage gearbox, unparalleled reliability, constant speed, and stable output
Gun-shaped design, ergonomic and lighter
Torque output in forwarding and reverse directions are the same
Low noise, non-shock output torque
Accuracy ±5% (requires a correct supply of air pressure and air volume)

Think Safety
Manufacturer’s rating of load and stroke are maximum safe limits. Good practice encourages using only 80% of these ratings!

Specifications

Square Drive(Inch)	1 or 1.5
Min. Torque(Nm)	1350
Max. Torque(Nm)	4000
Speed(Rpm)	4
Noise(dB)	85
Weight (kg)	10.2

Dimensions

Dimension A(mm)	270
Dimension B(mm)	88
Dimension C(mm)	102
Dimension D(mm)	223

Series Comparison

When selecting a torque wrench, the working torque should be lower than 80% of the max torque. The pneumatic torque wrench cannot exceed the air pressure limit

Model	Square Drive(Inch)	Min. Torque(Nm)	Max. Torque(Nm)	Speed(Rpm)	Noise(dB)	Weight(Kg)	Dimension A(mm)	Dimension B(mm)	Dimension C(mm)	Dimension D(mm)
RFW8	0.75	240	700	18	80	4.7	265	69	69	223
RFW14	0.75 or 1	405	1350	12	80	4.7	265	69	69	223
RFW20	1	600	2000	10	80	6.6	273	76	85	223
RFW40	1 or 1.5	1350	4000	4	85	10.2	270	88	102	223
RFW60	1.5	1800	6000	2.5	85	11.7	289	93	102	265
RFW80	1.5	2400	8000	2.2	85	13.2	300	102	102	265

You May Be Interested In

RRH603, 60 Ton Capacity, 89mm Stroke, Double Acting Hollow PLunger Hydraulic Cylinder

The hollow piston allows for a rod or cable to be inserted through the entire body length, while the double-acting design improves the speed of operation when longer stroke cylinders are required. They can be used in tensioning, load testing, bush extracting, and maintenance applications. All cylinders in this range have base mounting holes.

Get a Free Quote

RACH Series,Single Acting Aluminum Hollow PLunger Hydraulic Cylinders

RACH1508, 150 Ton Capacity, 200mm Stroke, Single Acting Hollow Plunger Aluminum Hydraulic Cylinders

The RACH series is a spring return hollow piston rod aluminum cylinder. The hollow piston allows for a rod or cable to be inserted through the entire body length. They can be used in tensioning, load testing, bush extracting, and maintenance applications. All RACH-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance…

Get a Free Quote

SCM300, 30 Ton Pancake Porta Power, Hydraulic Cylinder And Hand Pump Set

Ready-to-use hydraulic cylinder and pump sets. RIVERLAKE porta powers and sets provide the quickest and easiest way to start working right away. All kits include a single-acting hydraulic jack (ram), two-speed pump, 1.8 meters hydraulic hose, calibrated gauge, and gauge adaptor. Kits are available with 5 to 100-ton jacks (rams). Hydraulic jacks (rams) are available…

Get a Free Quote

BH100, 100 Ton Self-Centering Hydraulic Grip Puller

RIVERLAKE split type hydraulic pullers are used to remove shaft-fitted parts (bearings or couplings). Riverlake’s hydraulic pullers capacity range from 10 tons to 100 tons. In addition to railway vehicle maintenance, mechanical installation, mine maintenance, construction support, it can also disassemble circular workpieces such as pulleys, gears, and bearings in various mechanical equipment.

Get a Free Quote

Double Acting General Purpose Hydraulic Cylinders

CLRG4006, 400 Ton Capacity, 150mm Stroke, Double Acting General Purpose Hydraulic Cylinder

The CLRG-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

Get a Free Quote

RC7513, 75 Ton Capacity, 333mm Stroke, General Purpose Hydraulic Cylinder

The RC-SERIES is a general-purpose spring return cylinder designed for use in production, Maintenance, and fabrication applications. All RC-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance. When combined with the bronze overlay on the piston bearing area and low friction surface treatment on the gland nut, this cylinder…

Get a Free Quote

HCRL5010, 50 Ton Capacity, 250mm Stroke, Double Acting Lock Nut Hydraulic Cylinders

HCRL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding.

Get a Free Quote

RCH202, 20 Ton Capacity, 49mm Stroke, Single Acting Hollow PLunger Hydraulic Cylinder

The RCH series is a spring return hollow piston rod cylinder. The hollow piston allows for a rod or cable to be inserted through the entire body length. They can be used in tensioning, load testing, bush extracting, and maintenance applications. All RCH-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance and…

Get a Free Quote

EPH-216, 20 Ton, 2 Jaws, Safety Cage Hydraulic Puller

RIVERLAKE safety cage hydraulic pullers are more efficient than traditional pullers, as one person can do the job whereas traditional pullers often require two operators. The opening, closing, locking, and aligning of the jaws are all done automatically by simply turning the T-handle.

Get a Free Quote

RC258, 25 Ton Capacity, 210mm Stroke, General Purpose Hydraulic Cylinder

Get a Free Quote

CLL3006, 300 Ton Capacity, 150mm Stroke, Single Acting Lock Nut Hydraulic Cylinders

CLL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding. All CLL-Series…

Get a Free Quote

CLSG1506, 150 Ton Capacity, 150mm Stroke, Single Acting High Tonnage Hydraulic Cylinders

The CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.

Get a Free Quote