TW Series, Wind Turbine Hydraulic Tensioners

RT Series pullers are equipped with a through-hole design for additional applications and use for pulling requiring high force.

RACL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding. RACL-Series cylinders…

RIVERLAKE hydraulic nut splitters are a simple, fast, safe, and efficient tool to remove the bolt and nut. In the open-air high temperature or corrosive environment, the bolt is usually bitten by rust and damaged by smashing, It is very difficult to remove them In the past. With the help of our hydraulic bolt cutters,…

The RACH series is a spring return hollow piston rod aluminum cylinder. The hollow piston allows for a rod or cable to be inserted through the entire body length. They can be used in tensioning, load testing, bush extracting, and maintenance applications. All RACH-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance…

The RR-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

The CLRG-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

The most cost-effective solution to subsea bolt or stud tightening. Easily positioned in poor visibility conditions, our subsea tensioners feature a compact design and long piston stroke. These tools’ unique Split Nut design allows the rapid application to long bolts and damaged threads and fast tool removal.

The RACH series is a spring return hollow piston rod aluminum cylinder. The hollow piston allows for a rod or cable to be inserted through the entire body length. They can be used in tensioning, load testing, bush extracting, and maintenance applications. All RACH-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance…

The JH series hydraulic bottle jacks are made of high-strength aluminum alloy materials, all jack comes with a chrome-plated piston, and features a longer lifespan, and lower maintenance cost.

Our Post Tensioning/Stressing Jacks consist of both single and double-acting models with spring and power wedge capabilities. The jacks come with a 10-inch stroke and have either a 20 or 30-ton capacity. The jacks can adapt to strand sizes of 0.5″ and 0.6″ diameter strand and may be used with various types of anchors, wedges,…

HCRL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding.

RIVERLAKE supplies full ranges of flange spreaders, our flange spreader tools are normally used for separating flanges, widely being used in industrial applications such as pipeline maintenance, pipeline construction, testing and flange replacement, maintenance gaskets, pressure vessels, cylinder head opening, power plants, bearing disassembly, oil and electricity drilling, motor rotor disassembly, offshore platforms, jacking work,…