BHP1752, 14 Ton, Hydraulic Master Puller Set with Hand Pump

The CLRG-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

RIVERLAKE split type hydraulic pullers are used to remove shaft-fitted parts (bearings or couplings).  Riverlake’s hydraulic pullers capacity range from 10 tons to 100 tons. In addition to railway vehicle maintenance, mechanical installation, mine maintenance, construction support, it can also disassemble circular workpieces such as pulleys, gears, and bearings in various mechanical equipment.

The RC-SERIES is a general-purpose spring return cylinder designed for use in production, Maintenance, and fabrication applications. All RC-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance. When combined with the bronze overlay on the piston bearing area and low friction surface treatment on the gland nut, this cylinder…

The CLRG-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

RIVERLAKE hydraulic nut splitters are a simple, fast, safe, and efficient tool to remove the bolt and nut. In the open-air high temperature or corrosive environment, the bolt is usually bitten by rust and damaged by smashing, It is very difficult to remove them In the past. With the help of our hydraulic bolt cutters,…

The CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.

The RAR-SERIES is a general-purpose double acting lightweight aluminum cylinder designed for use in production, Maintenance, and fabrication applications. All RAR cylinders are equipped with bolt-on removable hardened steel saddles and are available in various capacities from 20 tons to 150 with a stroke from 50 mm to 250mm.

The RAC-SERIES is a general-purpose lightweight aluminum cylinder designed for use in production, Maintenance, and fabrication applications. All RAC cylinders are equipped with bolt-on removable hardened steel saddles and are available in various capacities from 20 tons to 150 with a stroke from 50 mm to 250mm.

RIVERLAKE safety cage hydraulic pullers are more efficient than traditional pullers, as one person can do the job whereas traditional pullers often require two operators. The opening, closing, locking, and aligning of the jaws are all done automatically by simply turning the T-handle.

The RC-SERIES is a general-purpose spring return cylinder designed for use in production, Maintenance, and fabrication applications. All RC-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance. When combined with the bronze overlay on the piston bearing area and low friction surface treatment on the gland nut, this cylinder…

RIVERLAKE specializes in the production of bolt tensioners of various specifications, with high precision, long life, and uniform and precise tensioning of bolts. Using high-strength alloy materials, reliable quality, and high precision, RIVERLAKE is your preferred brand of bolt tensioners!

RIVERLAKE’s lightweight hand pumps come with a compact design and lightweight construction for easy carrying. Two-speed lightweight hand pump models offer reduced handle strokes and lower handle effort to minimize operator fatigue.