LM3003W, 3 Jaws,300 Ton Hydraulic Puller

RIVERLAKE split type hydraulic pullers are used to remove shaft-fitted parts (bearings or couplings).  Riverlake’s hydraulic pullers capacity range from 10 tons to 100 tons. In addition to railway vehicle maintenance, mechanical installation, mine maintenance, construction support, it can also disassemble circular workpieces such as pulleys, gears, and bearings in various mechanical equipment.

RIVERLAKE safety cage hydraulic pullers are more efficient than traditional pullers, as one person can do the job whereas traditional pullers often require two operators. The opening, closing, locking, and aligning of the jaws are all done automatically by simply turning the T-handle.

RT Series pullers are equipped with a through-hole design for additional applications and use for pulling requiring high force.

The RC-SERIES is a general-purpose spring return cylinder designed for use in production, Maintenance, and fabrication applications. All RC-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance. When combined with the bronze overlay on the piston bearing area and low friction surface treatment on the gland nut, this cylinder…

The RC-SERIES is a general-purpose spring return cylinder designed for use in production, Maintenance, and fabrication applications. All RC-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance. When combined with the bronze overlay on the piston bearing area and low friction surface treatment on the gland nut, this cylinder…

Ready-to-use hydraulic cylinder and pump sets. RIVERLAKE porta powers and sets provide the quickest and easiest way to start working right away. All kits include a single-acting hydraulic jack (ram), two-speed pump, 1.8 meters hydraulic hose, calibrated gauge, and gauge adaptor. Kits are available with 5 to 100-ton jacks (rams). Hydraulic jacks (rams) are available…

The RAR-SERIES is a general-purpose double acting lightweight aluminum cylinder designed for use in production, Maintenance, and fabrication applications. All RAR cylinders are equipped with bolt-on removable hardened steel saddles and are available in various capacities from 20 tons to 150 with a stroke from 50 mm to 250mm.

RIVERLAKE manufactures and supplies a broad range of trolley-mounted hydraulic pullers. Our universal pullers are available in different sizes, designs, and capacities.RIVERLAKE hydraulic pullers are made of high-strength forged steel alloys, and provide our customers with years of trouble-free operation, even in the harshest environments.

The CLRG-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

Our Post Tensioning/Stressing Jacks consist of both single and double-acting models with spring and power wedge capabilities. The jacks come with a 10-inch stroke and have either a 20 or 30-ton capacity. The jacks can adapt to strand sizes of 0.5″ and 0.6″ diameter strand and may be used with various types of anchors, wedges,…

The CLSG SERIES single-acting high-tonnage construction cylinders are ideally suited for construction, civil engineering, heavy fabrication, and maintenance applications. All models are supplied with a tilting saddle fitted as standard and have an over-stroke restrictor port to prevent over-extension of the piston. additional capacities and stroke options are available on request.

RIVERLAKE supplies full ranges of hydraulic flange spreaders, our flange spreader tools are normally used for separating flanges, widely being used in industrial applications such as pipeline maintenance, pipeline construction, testing and flange replacement, maintenance gaskets, pressure vessels, cylinder head opening, power plants, bearing disassembly, oil and electricity drilling, motor rotor disassembly, offshore platforms, jacking…