FS108, 8 Ton Integral Hydraulic Flange Spreader

The RAR-SERIES is a general-purpose double acting lightweight aluminum cylinder designed for use in production, Maintenance, and fabrication applications. All RAR cylinders are equipped with bolt-on removable hardened steel saddles and are available in various capacities from 20 tons to 150 with a stroke from 50 mm to 250mm.

The SW14.5TI is a 14.5-ton integral hydraulic spreader manufactured by RIVERLAKE. It is designed to hydraulically spread flange joints with a minimum access gap of 6.0mm,flange plates can be opened up to 81mm range. Hydraulic pumps and hydraulic jacks were integrated into the 14.5 Ton Hydraulic Flange Spreader. The product thus becomes more portable and…

The RACH series is a spring return hollow piston rod aluminum cylinder. The hollow piston allows for a rod or cable to be inserted through the entire body length. They can be used in tensioning, load testing, bush extracting, and maintenance applications. All RACH-Series cylinders feature a hard chrome cylinder bore and piston rod for maximum corrosion resistance…

RIVERLAKE safety cage hydraulic pullers are more efficient than traditional pullers, as one person can do the job whereas traditional pullers often require two operators. The opening, closing, locking, and aligning of the jaws are all done automatically by simply turning the T-handle.

RACL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding. RACL-Series cylinders…

Compared with other flange separators, the collect style flange spreaders can separate flanges with 0mm gaps and has a larger output option (up to 25 tons). It is suitable for pipeline maintenance, repair, testing, and flange replacement applications while causing no flange damage.

RIVERLAKE integral hydraulic nut splitters are a simple, fast, safe, and efficient tool to remove the bolt and nut. In the open-air high temperature or corrosive environment, the bolt is usually bitten by rust and damaged by smashing, It is very difficult to remove them In the past. With the help of our hydraulic bolt…

The CLRG-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

The CLRG-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

The RR-Series double-acting high tonnage industrial cylinders are specifically designed for lifting and maintenance applications. All models are supplied with a tilting saddle to reduce the risk of damage caused by side loading and an integral stop ring for stroke limitation is fitted as standard.

CLL-SERIES is a design that features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and maintenance and jacking applications requiring safe extended load holding. All CLL-Series…

RIVERLAKE integral hydraulic pullers come with a built-in hydraulic hand pump, with no need for an extra hand pump and hydraulic hoses set up. Our integral pullers’ capacity range from 4 tons to 50 tons and are portable tools for bearing removal applications